Download smart pss v1.11.1 for free. System Utilities downloads - Smart PSS by Zhejiang Dahua Technology Co., Ltd and many more programs are available for instant and free download. Free smart pss 1.6 download download software at UpdateStar - The whole internet just became print friendly. With a simple plug-in for your browser, quickly Select & Clip or Select & Print web pages just the way you want them, and eliminate all that wasted ink and paper. As soon as the download finishes, you should find the Kodi installer on the Mac default download folder. Once you see the Kodi installer that you just downloaded, click on it to open the file. Wait for a few seconds until a window prompt will appear. SmartPSS is an all-in-one, full-featured video surveillance application that is ideal for the small to mid-size business that needs to monitor people, premises, and assets.

A handy piece of software that enables you to configure, set alarms and keep an eye out for events as they are detected by the Dahua surveillance systems

What's new in Dahua SmartPSS 2.003.0000001:

• New Function:
• Support video structuring, add target detection module, including real-time target detection (motor vehicle, non-motor vehicle, pedestrian), target attribute display, history record by condition, attribute export, video recording (playback, download)
• Support TPC device in the preview module for point temperature measurement
• Support machine non-human alarm, alarm type: human detection, motor vehicle detection, non-motor vehicle detection

Read the full changelog

In the eventuality that you have installed a surveillance system that includes several cameras cleverly positioned around the perimeter of your property, then there is a chance that you are looking for a tool that enables you to configure it so that you are updated on all events captured.

Smart PSS is an application that enables you to manage Dahua surveillance cameras so that you view real-time footage of several channels and receive alerts whenever suspicious activity is detected.

Straightforward setup and user-friendly interface

The installation is straightforward and only requires your attention when it comes to selecting the components that you would like to install. To be more precise, in case you have an NVR tool already installed on your PC, then you can skip adding it this time. You should know that the aforementioned utility allows you to define the password for accessing the application.

Once you log in, you are welcomed by a rather rugged user interface that includes 2 main tabs, the Home and Add. While the Home tab enables you to manage the parameters of your cameras, the Add has the role of providing you with an easy way of adding the surveillance cameras in your system.

Allows you to manage surveillance devices and set alarms

You will be happy to learn that adding a new device is as simple as it gets and entails specifying a few details, such as the name, IP, SN or domain name, port, group name, and your credentials. The fastest way to configure the new device is to access the Get Info function and specifying the input and output of the video source and alarm.

The highlight of the program comes from the fact that you can set alerts for various events that you want to track, like motion detection, camera masking or video loss, for example. You can define the action to be taken once the alarm is triggered by setting up a scheme.

A handy tool for anyone using an advanced surveillance system

If you want to manage your Dahua surveillance system more efficiently and configure all devices easily so that you are not caught off-guard, then perhaps Smart PSS can lend you a hand.

Filed under

Dahua SmartPSS was reviewed by Alexandra SavaSYSTEM REQUIREMENTS

• Intel core i3 or higher
• Intel HD Graphics and higher
• 2GB RAM
• 1024× 768 or higher resolution

This enables Disqus, Inc. to process some of your data. Disqus privacy policy

Dahua SmartPSS 2.003.0000001 / 2.02.1 International

add to watchlistsend us an update

runs on:

Windows 10 32/64 bit
Windows 8 32/64 bit
Windows 7 32/64 bit
Windows Vista 32/64 bit
Windows XP 32/64 bit

file size:

128 MB

filename:

DH_SMARTPSS-Win32_ChnEng_IS_V2.003.0000001.0.R.191028.zip

main category:

Multimedia

developer:

visit homepage

top alternatives FREE

top alternatives PAID

Z-SUITE 2

Smart Pss 32 Bit

• Improved printing quality of Druckwege Type D Dental Model resin for Inkspire,
• Z-HIPS printing profile is no longer available for Inventure,
• Z-ESD v2 printing profile is no longer available for Inventure and M300 Dual,
• Fixed some of the problems where a blank screen would appear when starting Z-SUITE on macOS.

M300 Dual:

Smart Pss 1 16 1 Download For Mac Download

• Added new printing profiles with 0.15, 0.20 and 0.30 mm layer thickness values:
• Z-ABS + Z-SUPPORT ATP
• Z-ASA Pro + Z-SUPPORT ATP
• Z-ULTRAT + Z-SUPPORT ATP
• Z-ULTRAT Plus + Z-SUPPORT ATP

Inkspire:

• The Tree type support can now be generated automatically. This support type allows users to save resin and eliminate cases where pillars of support merge with each other,

M Series Plus, M300 Dual, Inkspire:

• Added the new option One-click Printing which enables users to quickly and easily prepare files for printing. All required steps take place automatically: the user only has to choose basic settings, such as material type or layer thickness, and choose where the generated file should be saved (hard drive or the printer’s USB drive), or only showed in the Preview. Next, the program adjusts the Rotation for the model (only for Inkspire), adds the automatic support and generates the output file.

Bug fixes:

• M300 Dual & Inventure: Improved extrusion at the beginning and end of prints, and at the time of changing between hotends,
• Inkspire: Fixes cases where pillars would disappear with angled surfaces when adding support manually,
• Improved detection of cases where support pillars would collide with models,
• Improved support generation, especially with pillars placed on the edges of the workspace,
• M Series Plus, M300 Dual, Inventure: Improved generation of Smart bridges which are adjacent to the top layer area; Improved Smart bridges generation after rotating a model,
• Improved fan operation when printing the first layer of supports,
• Fixes some of the quality issues with the Shell mode.

Inkspire:

• Added support for Druckwege Type D Dental Model Resin,
• Supported resin types are now divided in a more transparent way, according to their applications or characteristics (e.g. Dental, Jewelry, Tough, Flexible, etc.)

Inkspire:

• Added new layer thickness values for Dreve FotoDent® model and FotoDent® guide resins – 0.1 mm,

All devices:

• Improved the way of highlighting overhangs that require support structures – the highlight does not include layers which base directly on the platform,
• Added a notification about the requirement to install the newest firmware update in the device,

Bug fixes:

• Fixed a bug with tooltips in the Support step,
• Improved translation of menu texts.

M300 Dual & Inventure:

• New printing profiles and layer thickness values:
  • Single-extrusion mode: Z-FLEX 0.15; 0.20; 0.30 mm / Z-HIPS 0.15; 0.20; 0.30 mm / Z-ULTRAT Plus 0.15; 0.20; 0.30 mm
    Z-ULTRAT 0.30 mm / Z-PLA Pro 0.15; 0.20; 0.30 mm / Z-PLA 0.30 mm / Z-PETG 0.30 mm / Z-GLASS 0.30 mm / Z-NYLON 0.30 mm,
  • Dual-extrusion mode: Z-SEMIFLEX 0.15; 0.20 mm / Z-PLA Pro 0.15; 0.20; 0.30 mm / Z-PLA 0.30 mm / Z-PETG 0.30 mm / Z-GLASS 0.15; 0.20; 0.30 mm / Z-ESD 0.15; 0.20 mm,
• It is now possible to enable the Hybrid Support option when printing in the dual-extrusion mode. The feature has been added to the Support step in the Advanced print settings menu. Selecting this option makes the printer use the soluble material only for those layers which will adhere to the model or will be built on the model’s surface. The remaining part of support structures will be printed with the model material. This way, you can save the support material and speed up the printing,
• Added the Replicate .zcodex option,
• Increased printing speed for Z-PETG, Z-PLA and Z-ULTRAT Plus in the dual-extrusion mode,
• Improved quality of supported overhanging walls for Z-ULTRAT Plus (dual-extrusion mode) and Z-PLA (single-extrusion mode).

M Series Plus, M300 Dual & Inventure:

• Introduced a new tool which allows you to enable or disable Smart Bridges (short bridge-like structures) in the Support step. This tool gives users more control over spots which require support: enabled bridges do not require support, whereas disabled ones can be supported using standard editable support,
• Introduced the new Contour-top gap option in the Offset section in Print Settings – it is now possible to change the distance between the top layers of a model and outer contour (the bond between the top layers and the outer contour can be increased, but the model’s dimensions may slightly change),
• Added the May not print notification in the Thin Walls Analysis tool, which informs users about cases where the device may not be able to print too thin elements,
• Added the Only from raft option in the Support step. After selecting this option, the program will generate only those support structures which do not adhere to any part of the model. This allows you to avoid surface imperfections that can appear on models once you remove the support,
• The generated .zcodex files will now have a smaller size when you do not use the Replicate .zcodex option,
  It is now possible to change the Offset outer contours and Offset holes values up to -1 mm, which allows users to decrease the size of models and holes.

Inkspire:

• Introduced a new manual supports type: Tree, available in the Support step. The tree-like structures can be easily customized and are recommended when 3D printing elements rich in details. Also, you can edit a tree structure when it collides with the model by dragging and moving the yellow joints around,
• Added support for 23 resins delivered by third-party manufacturers: ApplyLabWork, HARZ Labs, Dreve. The new printing profiles are available to use after changing the Material group to External,
• Increased speed of operation and reduced consumption of RAM while generating supports and working with .zcodex files (generating, saving and loading previews),
• The way of generating spots that require support has been optimized. The program can now better detect little, overhanging elements and edges. This improvement provides more stability and a decreased failure rate. The overall efficiency of generating supports and the default parameters have been improved so that supports now better adhere to 3D printed items,
• It is now possible to add and delete support only for a selected model when preparing multiple projects. Also, it is possible to select many models and generate support for all of them at once,
• The Size correction tool has replaced the Overgrowth correction tool. It is now possible to increase or decrease your model’s dimensions by 1 or more pixels in the X or Y axis. This tool is available in the Print settings step in the Advanced menu,
• The support settings are now saved even when leaving and going back to the Support step,
• Added the Real View mode – it represents the real view of a bottom up print (the option can be found in the navigation cube in the top right corner of the workspace),
• The Model lift option has been limited to decrease the failure rate of prints: the minimum value for lifting models is now set to 5 mm.

All devices:

• You can now cancel the process of sending a .zcodex file to the printer in the Preview step – an adequate button has been added.

Bug fixes:

• Improved performance of the Place by face tool and Editable support after using the Mirror Flip option,
• Fixed an issue where the wrong notification would appear when slicing a model that is too low,
• Improved process of generating Bridges – empty spaces should no longer appear in generated bridges,
• Inkspire: Fixed problems where it wouldn’t be possible to slice a model that contains more Bottom layers than the overall number of layers,
• Fixed problems with assigning colors to model/support blocks in the Support step (the Preferences menu),
• Inkspire: Improved process of detecting collisions between objects and supports,
• Improved movement pattern when finishing prints – minimized risk of leaving nozzle marks on models,
• Fixed an issue where using the Replicate .zcodex option would improperly replicate models that have been generated without the raft or in the shell mode,
• M300 Dual: Fixed an issue where the program would become unresponsive when sensing files that have been prepared for a difference material than the loaded one,
• M300 Dual: Fixed an issue where the program would crash when sending files directly to the printer,
• Loading multi-element .3mf files should no longer cause problems where only first element would be loaded,
• Inkspire: Cases where raft would get through models have been eliminated,
• Opening Z-SUITE from several user accounts simultaneously on Windows should no longer cause problems with blocking other accounts,
• M200 & M300: Improved Editable support option’s icon.

• Added support for Z-ESD v2 for M Series Plus printers (0.09; 0.14; 0.19; 0.29 mm); M300 Dual and Inventure (0.15; 0.20 mm for dual-extrusion mode).

Added support for new External Resins for Inkspire:
• AmeraLabs AMD-3 Black Model
• AmeraLabs DMD-21 Dental Model
• Power Resins PowerCast Burn
• Power Resins PowerCast Opaque
• Siraya Tech Blu Clear V1
• Siraya Tech Blu Clear V2

• Added support for Z-ABS v2 (M200, M200 Plus and M300 Plus).

M Series Plus, M300 Dual, Inventure:

• Introduced the new Contour-infill gap option – you can now change the space that is between outer contours of a model and outer contours of infill,

Inkspire:

• Improved default support settings – adhesion between models and support has been increased,

All devices:

• minor bug fixes.

• New types of editable support are available for FDM printers: Automatic, Point, Surface, Single Surface and Area type. The way of detecting areas that require support has been changed:
  –Point type is for a single, small point of a model,
  –Surface type is for the whole slope or flat surface in a model,
  –Single Surface type is for single overhanging layers,
  –Area type is for the selected range of overhanging layers in a model. This type can also be enlarged to surrounding layers,
• Editable support is now available for the dual-extrusion mode for the M300 Dual and Inventure,
• The program can now repair files when loading projects for the Inkspire,
• The new Variable Layer Thickness option for Inkspire allows users to divide models into one or more areas, each of which can be printed with different layer thickness settings. Within one model, one area can be printed with thicker layers (for parts with less details) and other areas can be printed with finer layers (for parts which require high quality of details),
• You can now select the Material Group before you select a specific resin type for Inkspire models,
• Retraction speed has been increased to 100mm/s in the External Materials menu,
• Bug fixes:
• improved communication with printers: failsafe responses should be properly displayed,
• a printer’s current state should be properly displayed in the My Devices panel,
• if a print job fails to start from Z-SUITE, printers should display proper message relating to the cause of failure,
• Z-ABS should be properly recognized when sending files to printers’ storage,
• printers now display the number of replicated .zcodex copies next to the miniature during a print job,
• models should now be properly arranged in the workspace after using the Split option,
• opening .zprojx files for Custom Printers should no longer cause problems,
• opening large .zprojx files should no longer cause problems with the workspace view.

Z-SUITE 2 for macOS is stable only for versions up to 10.14 (Mojave). When using newer versions, Z-SUITE 2 may not run as efficient.

Z-SUITE 1

• Introduces minor fixes of the print quality for Z-PLA PRO.

• Fixes an issue with removing the raft from Z-PLA Pro prints and introduces minor fixes of the print quality (0.09 and 0.14 layer thickness),
• Improves the print quality for Z-ULTRAT Plus (Inventure).

• Adds support for Z-ULTRAT Plus and Z-SEMIFLEX (Inventure),
• Introduces new Layer Thickness for Z-ASA Pro and Z-HIPS – 0.09 (M Series printers),
• Introduces new Layer Thickness for Z-ULTRAT – 0.29 (M200),
• Introduces Shell infill for PLA-based materials (External Materials).

• Quicker slicing process of complicated models,
• New Print Quality type: Draft (for Z-ABS 0,14 and 0,19, and Z-HIPS 0,19),
• Increased density of Maximum Infill for Z-HIPS and Z-ABS materials.